Fluoroplastic moulding can process plates, rods, sleeves, tapes25mm PTFE Tape Teflon Tape for Gas, sealing rings, diaphragms and parts with metal inserts. Compression molding is divided into three steps: pre-forming, sin...
Generally, the heat resistance of water-soluble bai tape and hot-melt tape is below 80 degrees; the heat resistance of solvent du tape is below 140 degrees; the silicone tape dao can withstand 180 degrees, 220 degrees, 2...
PVDF is polyvinylidene fluoride, which is slightly worse than F4 and F46. www.qgbxg.com has low temperature resistance and poor corrosion resistance (the price is much cheaper than F4 and F46). PTFE (F4) is polytetrafluo...
Pipe thread sealant is better. It acts as a lubricant when tightening the threaded connection as well as hardening into a permanent sealant.PTFE Seal Tapes 25mm Red Spool Pipe thread tape, commonly known as...
High temperature resistant aluminum foil tape, the conventional high temperature resistant du aluminum foil tape on the market, which is widely used, generally has a temperature resistance of about 180°zhiC to 200°C, whi...
①. The tape should be stored in the warehouse to avoid sunlight and rain; contact with acid-base oil and organic solvents is prohibited, www.qgbxg.com is kept clean and dry, 1m away from the discovery device, and the roo...
