The main issue with mono-axial PTFE Tape OEM gasket tapes is that due to the orientation of the fibrils being in only one direction, the material is susceptible to tearing/splitting when tension is applied in the transve...
In reality, there are many classification Teflon Tape standards for tapes that we often say. It can be classified according to the use of the glue system or according to the different input of the base material has also ...
During these uncertain times, you PTFE Tape may be wondering if your adhesive tape inventory has gone beyond its shelf life. The shelf life is considered the period of time an adhesive remains usable after being manufact...
While PTFE Thread Seal Tape is not difficult to use, it is not as simple as slapping on some good old duct tape and calling it a day. The way it is applied is vitally important, not only because incorrect application wil...
The correct way to apply the tape is to follow the direction of the thread, as if you were tightening up the nut. 99.9% of the time, nuts tighten up clockwise, so this is the way you should also apply the PTFE tape.For t...
Poly-tetra-fluoro-ethylene is not only PTFE Thread Seal Tape inert to most of the chemical reactions, but also offers high level of heat resistivity. This is the reason it is widely used in manufacturing of sheets, tapes...
We are a professional China PTFE Thread Seal Tape Suppliers and Pipe Sealing Tape Manufacturers,with excellent insulation of high and low temperature and acid and alkali-resistant features
Copyright © Hangzhou Linan Gana Fluorine Plastics Co.,Ltd.All Rights Reserved. Technical Support : HWAQ